Go Bottommounting dismounting mid-mount mower
 | Norm
Join Date: Posts: 1 
|
1999-06-15 5167
I have a JD 755 w/ 60" mid-mount mower. The linkage is fast and easy, both on and off. Does anyone have any tips for dragging the hog into/out of position - that is the worst part of the job!!thanks!
Reply to |
Quote Reply |
Add Photomounting dismounting mid-mount mower
| GeneBinNJ
Join Date: Posts: 1
|
1999-06-18 5292
I have a Kubota B7300. I had read that one can run over the deck with the front wheels if you use blocking under the deck. I have 4wd and it worked for me. This may just work for you. The only problem I encountered is that I set my deck high at 3" and the top of the gearbox on the deck rubbed the front axle a little.Good luck. ....
Reply to |
Quote Reply |
Add Photomounting dismounting mid-mount mower
| Tom
Join Date: Posts: 1
|
1999-06-22 5411
I have a ford 1210 with a 60" deck. On a concrete surface I jack up the tractor by the front end and slide the deck out from under. To get it out I have to turn the stearing wheel all the way to one side or the other. I also use a 4X4 wood block on the floor jack to get extra height. ....
Reply to |
Quote Reply |
Add Photomounting dismounting mid-mount mower
| dana
Join Date: Posts: 1
|
1999-08-06 6674
i also have a 755jd i built a slick set of ramps. they just fit between the tires. so you can remove them easly. built out of 1"sqare tubing. i let the deck down & unhook it set my ramps & back over them. do the same to hook it up. if you need more info e-mail me & i'll go measure them & the angles i used. dana trumpcab@kansas.net ....
Reply to |
Quote Reply |
Add Photomounting dismounting mid-mount mower
| dana
Join Date: Posts: 1
|
1999-08-06 6675
i also have a 755jd i built a slick set of ramps. they just fit between the tires. so you can remove them easly. built out of 1"sqare tubing. i let the deck down & unhook it set my ramps & back over them. do the same to hook it up. if you need more info e-mail me & i'll go measure them & the angles i used. trumpcab@kansas.net ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This